Hot Tub Basics C5 CB Electronic Spa Control System 120/240V 1.4/5.5kW Retrofit
The C5 control series of controls come out of the box ready to operate at 120V or 240V (3-wire or 4-wire), at 50Hz or 60Hz, and configurable to 40 different hardware configurations. That makes any C5 product line capable of operating almost any spa, right out of the box! This listing is for the. C5-B Bottom mount heater system. Standard Features: – Self-Standing Control – Dual-Voltage (120V/240V) Operation – T7 Digital Topside. Dual voltage/wattage 2 Flo-Thru 5kW Stainless Steel Heater. 2 Speed 1st Jet Pump Ready (Cord Included) – 12v Spa Light Ready (Cord/Harness Included). Ozone Ready – Circulation Pump Ready – 1 Speed 2nd Jet Pump Ready – 1 Speed Aux Pump (Jet or Air) Ready. There is no need to swap out transformers in order to switch between 240V and 120V power hook-ups! It can be easily converted to 120V incoming power voltage by moving the transformer’s 2-pin power selector plug between the control board’s 120V and 240V receptacles. [Detailed in the Installation Manual]. These controls come preset with primary and secondary pumps wired for 240V, and all other components (ozone, circulation pump, aux pump, audio) wired for 120v. Voltages of these controls may easily be changed by moving the neutral wires at the power block in the control as needed [Detailed in the Installation Manual]. These units only come with the power cords for the 12V light and the two speed primary pump. If you are hooking up additional accessories pump 2, blower, Ozone etc… Heater plumbing is for 2 Sch 40 PVC. For new installations the T7 Panel that is is supplied requires a 1.75 hole saw. The temperature sensor requires a 1/4 Thermowell/Bushing (dry sensor well/housing). 11.25″H x 15.50″W x 3.25D. 13.00″H x 15.50″W x 6.00D. 8.50″H x 20.50″W x 6.00D. 8.50″H x 13.00″W x 3.00D. 11.25″H x 12.75″W x 3.00D. 6.00″H x 15.50″W x 3.25D. 3.50″H x 20.50″W x 5.50D. 5.50″H x 20.50″W x 3.50D. 13.25″ x 2.63″. Heater (N/A on C5-G). UL STD 1563 – 5th Edition. CSA C22.2 NO. Minimum Heater Flow (by model). Aux (Air or Pump-3). 0°F (-18°C) to 145°F (63°C). 2°F (-19°C) to 175°F (79°C). Up to 80% RH, non condensing. 99% of follow up questions about’not working system’ are due to installation issues not the product. Factory support only offers telephone support to licensed spa technicians. Judgment adversely affects the product? S performance/reliability, or if the equipment is used for commercial purposes (used for other than single family household purposes). Misuse and abuse shall include application, installation, or operation outside of the environment and limitations for which it was designed. We accept payments from Verified U. If you order multiple items there is a good chance you will receive more than one package. Please note the following. If gaskets, O-Rings & Seals are removed from their sealed packaging. If parts show evidence of wear, contact with water or chemical damage. Items with Double Sided Tape, Protective Face Plastics or factory coverings show evidence of these items being removed. Why the strict policy? – We do not sell used parts! If you’ve installed, attached, hooked up… Any part it is considered used. Tools Safety items, including but not limited to sensors, switches & suctions. Track Page Views With. Auctiva’s FREE Counter. The item “Hot Tub Basics C5 CB Electronic Spa Control System 120/240V 1.4/5.5kW Retrofit” is in sale since Friday, November 8, 2019. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Spa & Hot Tub Parts”. The seller is “spapartshop” and is located in Tempe, Arizona. This item can be shipped to United States, all countries in Europe, Canada, Australia.
- Country/Region of Manufacture: United States
- MPN: CB09T7
- Brand: United Spa Controls